Jim Allen's Setup for a NEME-Q +

• Elevator - 5/32 up, 3/32 down, set the high rate whatever you want above that

• Rudder - 5/16 up, 1/4 down

• Aileron - 7/32 up, 5/32 down.  It is very important to have this differential.  One of the photos below shows how you get there by putting the aileron pushrods in the servo arm one hole forward of center

• Center of Gravity - 3 1/8"

• Install the servo tray 1" from the floor and the front edge 3 1/4" from the trailing edge of the wing.

			Steven & John Vaclav's view of the set-up